Roland R26 Memory Card Recorder

Specifications:

Recorder/Player
Tracks
6 (3 stereo)
Signal Processing
AD/DA conversion: 24 bits, 96/88.2/48/44.1 kHz
A/D D/A Dynamic Range: 100dB from XLR in to Phones out
Data Type
For Recording
WAVE/BWF: Sampling Rate: 96/88.2/48/44.1 kHz, Bit Depth: 24/16 bits, mono or stereo
MP3 (MPEG-1 Audio Layer 3): Sampling Rate: 48/44.1 kHz, Bit Rates: 320/160/128 kbps
WAVE + MP3: Sampling Rate: 48/44.1 kHz, Bit Depth: 16 bits, Bit Rate: 128 kbps
For Playback
WAVE: Sampling Rate: 96/88.2/48/44.1 kHz, Bit Depth: 24/16 bits
MP3 (MPEG-1 Audio Layer 3): Sampling Rate: 48/44.1 kHz, Bit Rates: 32-320 kbps or VBR (Variable Bit Rate)
File Storage
SD/SDHC Memory Card - up to 32GB
Recording Time
(unit: hours)
R-26 Recording Time
* Recording time is approximate. Times may change depending on card specifications. * In the case of plural files, the sum of all recording time would be shorter than above.
Input/Output
Audio Inputs
Internal Stereo Microphones: Omnidirectional (OMNI) mic, Directional (XY) mic
Analog inputs 1/L, 2/R (XLR/TRS Combo type): XLR type (phantom powered), 1/4-inch TRS phone type (balanced/unbalanced) Plug-in powered mic input (Stereo miniature phone type)
Audio Output
Headphone jack (Stereo miniature phone type)
Nominal Input Level
(Variable)
Analog inputs 1/L, 2/R: +4, -2, -8, -14, -20, -26, -32, -38, -44, -50, -56, -62 dBu
Plug-in powered mic input: LOW -7.5 dBu, MID -21 dBu, HIGH -26 dBu * Input Level Knob : Center
Input Impedance
Analog inputs 1/L, 2/R : 5k ohms
Plug-in powered mic input : 3k ohms (SENS = MID/HIGH), 2k ohms (SENS = LOW)
Maximum Input
Analog inputs 1/L, 2/R : +24 dBu (SENS = +4 dBu)
Plug-in powered mic input : +4 dBu (SENS = LOW)
Output Level
35 mW + 35 mW (In case 16 ohms load)
Recommended Load Impedance
16 ohms or greater
Frequency Response
20 Hz - 40kHz (+/-2dB, 96kHz)
Equivalent Input Noise:
-124 dBu (Sens +4dBu)
THD
0.01% max (XLR, Sens +4dBu)
High Pass Filters
Cut off Freq. = 100, 200, 400Hz
Mic Input Limiters
-3 dBFS Threshold
INF limiting ratio
6 ms Attack time
5 sec Release time
Phantom Power
48 V + or - 4 V (<10mA in total) 10 mA or less in all channels
USB Interface
Mini-B type connector
USB mass storage device class (generic Win/Mac driver compatible)
USB audio: 2in/2out High Speed USB Audio interface
Up to 96kHz ASIO driver compatible
Other
Display
160 x 160 dots graphic display (touch screen)
Power Supply
AC adaptor Alkaline battery (AA, LR6) x 4 or Rechargeable Ni-MH battery (AA, HR6) X 4
Current Draw
500 mA (MAX)
Size and Weight
Width
82 mm
3-1/4 inches
Height
180 mm
7-1/8 inches
Depth
41 mm
1-5/8 inches
Weight
370 g
14 oz.

Recommended Microphones